FC-GF42/GP42 Gang Type
Twin CNC System Single spindle, two turrets
FeaturesSingle spindle (fixed), two turrets (movable) and twin CNC system..
Two turrets can operate simultaneously and carry out different cutting process on both ends..
Shaft, rod, or tubes both ends cutting (O.D. & I.D.)are carried out simultaneously to obtain very high concentricity and benefit..
Special auto loading & unloading system can be fitted to handle workpiece with unsymmetrical or special-shaped on ends..
Special spindle can be ordered for special job requirements..
Slope is 90° degree, chip is easy away from.
GF42 - FANUC GP42 - PC BASED
| Model | FC-GF42 | ||
|---|---|---|---|
| SPINDLE | No. of spindle | Unit | 1 |
| Max. speed | rpm | 4000 | |
| Feedrate | X/Z axis rapid traverse | M/min. | 12 |
| Stroke | X1 axis stroke | mm | 420 |
| X2 axis stroke | mm | 420 | |
| Z1 axis stroke | mm | 220 | |
| Z2 axis stroke | mm | 220 | |
| Y1 axis stroke | mm | - | |
| Y2 axis stroke | mm | - | |
| Turret | No. of turret | unit | 2 |
| Turret type | servo | Gang type | |
| O.D. tool shank | □mm | 20 x 20 | |
| I.D. tool shank (Max.) | Ømm | 25 | |
| Motors | Spindle motor | KW | 7.5 |
| Servo motor, X axis | KW | 1 | |
| Servo motor, Z axis | KW | 1 | |
| Hydraulic pump | HP | 2 | |
| Lubrication pump | W | 12 | |
| Coolant pump | KW | 0.75 | |
| Machine size | Length | mm | 1880 |
| Width | mm | 1616 | |
| Height | mm | 1975 | |
| Net weight | kgs | 4500 | |
| Gross weight | kgs | 5500 | |
Specifications are subject to change without further notice.
Standard
- Full guard
- Coolant system
- Air conditioner
- Operator panel
- Tools for set up
- Pneumatic/Hyd. System
- Tower light
- Work light
- Chip conveyor
- Chuck
- Extension Chuck sleeve
- Power milling
- Collet
- Auto load/unload system
- Oil mist collector
- FANUC / PC BASED
- Tailstock(TF10)
